SYLTHERM™ 800 is a stabilized silicone heat transfer fluid used in high-temperature liquid-phase systems. ECO USA assesses used and surplus SYLTHERM 800 for silicone recycling. Material composition, contamination and condition determine whether a particular stream is suitable.
What is SYLTHERM 800?
Dow identifies SYLTHERM 800 as a silicone polymer fluid for applications including chemical processing, oil and gas, and pharmaceutical operations. The manufacturer describes it as stable and long-lasting, with a low potential for fouling.
The product’s suitability for a specific installation depends on the equipment, operating conditions and manufacturer’s guidance. Service life should not be treated as a fixed guarantee for every system.
Operating range and typical properties
Dow’s product information lists a recommended operating range of −40°C to 400°C, a maximum operating temperature of 400°C and a freezing point of −60°C.
These figures describe the original product. Used fluid can contain contaminants or have properties that differ from the published data. Consult the current technical documentation and SDS when evaluating operation, storage or handling.
Contamination and material assessment
Process leaks, cleaning operations and mixing with other fluids can change a heat transfer fluid stream. Tell us about any known exposure to water, oils, chemicals or other process materials when requesting a recycling assessment.
Do not rely on a general description such as “silicone oil” to establish the condition of a used batch. Product identification, operating history and appropriate analysis help determine its compatibility with our process.
Recycling silicone heat transfer fluid
ECO USA assesses suitable silicone-based heat transfer fluids for processing at our West Virginia facility. Incoming material is tested before a processing route is confirmed.
Our process recovers silicone components from suitable feedstock, then uses further processing, filtration and polymerization to manufacture recycled polydimethylsiloxane (PDMS) silicone oil. Actual recovery depends on the specific stream; a yield reported for another technology or feedstock is not a prediction for your material.
Learn more about our silicone recycling process and the silicone fluids we collect.
Information to provide before collection
Send the product name, SDS or TDS, estimated quantity, collection location and container details. Our silicone oil recycling guide explains the initial collection information we need. Specify whether the material is unused stock or fluid removed from an operating system, and include any available analysis results.
Contact ECO USA to discuss acceptance, sampling and collection arrangements before shipping the material.
Technical reference
Dow: SYLTHERM 800 Stabilized Heat Transfer Fluid. Refer to the current manufacturer documentation for product-specific requirements.

